Workplace Safety Tips

Workplace Safety Tips To Promote Safety In The Office

Accidents happen in the office, not as frequent compared to the shop floor maybe but when it does, it is just as serious. Tripping, slipping, and falling ranks second to automobile accidents nationwide. Well okay it did not all happen in the office. Accidents of this nature happening in the office are a big part of incidences though. The good part is that most of these are prevented from happening with a few simple tools and reminders.

Keep the walkway clear.
Boxes and bundles, cables, wires and items carelessly piled are tripping hazards. Most times, these are just oops events, other times they are not.

Look before you sit.
Incidents of someone missing the seat often promote silent giggles but this actually could happen to anyone who would not take the time to reach for the chair before sitting down. Leaning back on the chair could end with your back to the floor. This is common to people who are thinking or are trying to reach something, misjudging balance. The person may pick himself or herself up as quietly as possible with nothing serious but an injured ego, sometimes though it does not end up as happily.

Even with all the computerization in the office, filing cabinets are still in much use.
Nothing very wrong here except that filing cabinets are heavy. Opening all drawers of the cabinet at the same time tips the balance of the cabinet towards you. Likewise, leaving a drawer open is a bump waiting to happen.

Don’t read while walking.
No one saved impressive time by reading while walking, yet this is a very common practice dumb and true. If you have to read while walking, be sure that no one is doing the same thing that you do. If you must, do not walk into the direction of the coffee station.

Don’t carry anything higher than your eye level.
Carrying loads higher than the eye level impresses no one. See how people refuse to walk towards you?

Do not run, relax.
Running may save a few seconds, after that you will take a breather for several minutes more.

Refrain from putting anything atop cabinets.
Cabinet drawers are for storing supplies. The top of the drawers is not.

Use the handrails.
Stairway handrails have its reason for being. Use it. People who do not use the handrail tire easy.

Use the elevator whenever necessary.
When carrying loads, wait for the elevator. The stairs are not worth the extra calories that you will burn.

Watch where you step.
Smooth surfaces are not always safe surfaces to step on especially in darkened aisles. Water could be dripping. Be safe. As they used to say, watch your step, this is truer when there is poor lighting.

Don’t eat at your workstation and in front of your computer.
Eating in the workplace saves time. Be sure though that it is not done near computers and other electrical equipment. Accidents caused by water must be avoided at all cost.

Other simple measures that are taken that could go a long way in promoting workplace safety is reporting unsafe conditions, loose steps, burned out lights, defective equipment, overloaded sockets, hay caramba! The list is long. The benefits though are immense.

OSHA NFPA 70e WorkPlace Safety

OSHA & Arc Flash NFPA 70E: Standard for Electrical Safety in the Workplace have set and written standards and regulation. Safety standards are developed by National Fire Protection Association & OSHA (Occupational Safety and Health Administration), nonprofit organization for the safety of employees and to maintain work place safety and security.

NFPA 70E is important as it provides a bridge between OSHA’s requirement to protect against these arc flash hazards and dangers as well as actual compliance with that rule.

NFPA 70e includes the entire range of electrical safety issues, including workplace safety related work practices, equipment maintenance and require of special equipment.

NFPA 70e provides information to help companies reduce and minimize the exposure to all widely recognized electrical and fire hazards for the safety of employees and reduce the death rate and injuries caused due to these hazards.

In order to minimize the effect of the arc flash hazards and increase the work place safety by performing arc flash hazards analysis to ensure workplace safety.

In order to ensure proper workplace safety as well that you are meeting NEC, OSHA, IEEE and NFPA 70e requirement make use of proper arc flash analysis and study software to increase the protection boundary against arc flash hazards.

Make use of lockout Tag-out training and procedure to ensure tools are de-energized or live components are isolated.  Many companies also make use of arc flash labels that meet OSHA and NFPA 70e requirements to keep away employees from hazards.

NFPA 70E was originally developed at OSHA’s request to address electrical hazards in the workplace. OSHA bases its electrical safety requirements on the comprehensive information in NFPA 70E. Even though OSHA does not mandate compliance with NFPA 70E itself, it considers NFPA 70E to be an effective how-to manual for OSHA regulation compliance.

You can buy it from NFPA’s Web site, which also offers a companion handbook written by the developers of NFPA 70E.

Adam Warne is an eminent writer and expert in issues on topic on arc flash training, hazards and accidents. To get free instructions and strategy on how to avoid arc accidents and work hassle free make use of arc flash videos free and best online resource . To know more about the arc accidents and avoid them with nfpa 70e arc flash safety clothing visit arcflashtrainings.com.

 Page 1 of 4  1  2  3  4 »