Home and Work Fireplace Safety Tips

Most homes look and feel cozier when they have a fireplace, especially a workable one that the owners use on occasion. But even an attractive fixture of this type can be dangerous if it is not managed correctly or safely. If you have recently purchased a home that has a fireplace, find and read maintenance guidelines to make sure your fireplace continues to be a source of pleasure rather than pain.

When taking possession of your home, ask the previous owner about the condition of the fireplace. Find out whether it was used, and if so, how often. Inquire as to whether there were problems with the fireplace, and if the chimney ever needed or received any type of repairs. It also would be a good idea to ask if there had been any problems with a fire starting from the fireplace or if carbon monoxide levels were checked. Once you have this information, you will have a better idea of what needs to be done.

Get the chimney inspected. Even if the past owners confirmed that the fireplace was in good working order, an annual checkup is advisable to make sure the flue remains operational, and that creosote has not built up to dangerous levels. Besides, small animals like birds, squirrels, and bats can build nests in the chimney at any time, and severe weather can take an unexpected toll, so a yearly inspection is a good idea.

Learn how to start, maintain, and put out fireplace flames. Keep the necessary materials on hand, like kindling wood and a lighter. Do not burn just any kind of materials in the fireplace, as some, like aerosol containers, may explode while others may release toxic substances.

Keep the right equipment on hand. You will want to put up a screen to keep sparks from darting onto the floor or nearby furniture. A poker will let you stir the embers to check for embers. You will need a shovel and a small dustpan to remove ashes, as well as a bin for firewood. Don’t forget to keep a fire extinguisher on hand, and know how to use it. Teach family members what to do in case the flame should get out of control. Install a carbon monoxide detector and a smoke detector in the room to pick up early levels of problem fumes or smoke. Without the necessary items, you could run the risk of letting a fire spread into the room.

Never leave a fireplace flame unattended. Someone should stay in the room or be in and out frequently to monitor its burning. Otherwise, if a problem occurs, it could spread quickly without adequate supervision. Make sure the fire has burned out before leaving the house or going to bed. Don’t close the flue until the fire is completely out, or the house could fill with smoke or carbon monoxide.

A fire in your hearth is a beautiful sight, but it is important to learn how to tend it properly. Get the necessary guidelines and equipment before burning logs in your home fireplace.

For more information on fireplace safety tips, Visit The Fireplace Directory

OSHA NFPA 70e WorkPlace Safety

OSHA & Arc Flash NFPA 70E: Standard for Electrical Safety in the Workplace have set and written standards and regulation. Safety standards are developed by National Fire Protection Association & OSHA (Occupational Safety and Health Administration), nonprofit organization for the safety of employees and to maintain work place safety and security.

NFPA 70E is important as it provides a bridge between OSHA’s requirement to protect against these arc flash hazards and dangers as well as actual compliance with that rule.

NFPA 70e includes the entire range of electrical safety issues, including workplace safety related work practices, equipment maintenance and require of special equipment.

NFPA 70e provides information to help companies reduce and minimize the exposure to all widely recognized electrical and fire hazards for the safety of employees and reduce the death rate and injuries caused due to these hazards.

In order to minimize the effect of the arc flash hazards and increase the work place safety by performing arc flash hazards analysis to ensure workplace safety.

In order to ensure proper workplace safety as well that you are meeting NEC, OSHA, IEEE and NFPA 70e requirement make use of proper arc flash analysis and study software to increase the protection boundary against arc flash hazards.

Make use of lockout Tag-out training and procedure to ensure tools are de-energized or live components are isolated.  Many companies also make use of arc flash labels that meet OSHA and NFPA 70e requirements to keep away employees from hazards.

NFPA 70E was originally developed at OSHA’s request to address electrical hazards in the workplace. OSHA bases its electrical safety requirements on the comprehensive information in NFPA 70E. Even though OSHA does not mandate compliance with NFPA 70E itself, it considers NFPA 70E to be an effective how-to manual for OSHA regulation compliance.

You can buy it from NFPA’s Web site, which also offers a companion handbook written by the developers of NFPA 70E.

Adam Warne is an eminent writer and expert in issues on topic on arc flash training, hazards and accidents. To get free instructions and strategy on how to avoid arc accidents and work hassle free make use of arc flash videos free and best online resource . To know more about the arc accidents and avoid them with nfpa 70e arc flash safety clothing visit arcflashtrainings.com.

 Page 1 of 27  1  2  3  4  5 » ...  Last »